Smart Graphene Textiles for Biopotential Monitoring: Laser-Tailored Electrochemical Property Enhancement.

While most of the research in graphene-based materials seeks high electroactive surface area and ion intercalation, here, we show an alternative electrochemical behavior that leverages graphene's potential in biosensing. We report a novel approach to fabricate graphene/polymer nanocomposites with near-record conductivity levels of 45 Ω sq-1 and enhanced biocompatibility. This is realized by laser processing of graphene oxide in a sandwich structure with a thin (100 µm) polyethylene terephthalate film on a textile substrate. Such hybrid materials exhibit high conductivity, low polarization, and stability. In addition, the nanocomposites are highly biocompatible, as evidenced by their low cytotoxicity and good skin adhesion. These results demonstrate the potential of graphene/polymer nanocomposites for smart clothing applications.

UK national survey on surgical gowning for tonsillectomy.

OBJECTIVE: Tonsillectomy is a common procedure performed nationally. The personal protective equipment and surgical gowning practices used during this procedure vary widely. We compiled a survey of ENT specialists to gain a national opinion about gowning in tonsillectomy with the aim of determining whether we could make it more environmentally friendly whilst maintaining the highest safety standards. METHOD: We developed a nine-question survey that was piloted prior to final implementation. The questionnaire was sent to senior registrars and consultant otolaryngologists in the UK. RESULTS: The survey was completed by a total of 63 ENT specialists. It was found that 82.54 per cent of clinicians would consider wearing a reusable gown that would be sterilised between each procedure. CONCLUSION: Our survey suggests most ENT clinicians would consider using a more environmentally friendly surgical gown and some may even consider wearing no gown at all, although many are understandably concerned about the transmission of infection or blood splatter.

Therapeutic textiles: A promising approach for human skin dysbiosis?

The close interaction between skin and clothing has become an attractive cornerstone for the development of therapeutic textiles able to alleviate skin disorders, namely those correlated to microbiota dysregulation. Skin microbiota imbalance is known in several skin diseases, including atopic dermatitis (AD), psoriasis, seborrheic dermatitis, rosacea, acne and hidradenitis suppurative (HS). Such microbiota dysregulation is usually correlated with inflammation, discomfort and pruritus. Although conventional treatments, that is, the administration of steroids and antibiotics, have shown some efficacy in treating and alleviating these symptoms, there are still disadvantages that need to be overcome. These include their long-term usage with side effects negatively impacting resident microbiota members, antibiotic resistance and the elevated rate of recurrence. Remarkably, therapeutic textiles as a non-pharmacological measure have emerged as a promising strategy to treat, alleviate the symptoms and control the severity of many skin diseases. This systematic review showcases for the first time the effects of therapeutic textiles on patients with skin dysbiosis, focusing on efficacy, safety, adverse effects and antimicrobial, antioxidant and anti-inflammatory properties. The main inclusion criteria were clinical trials performed in patients with skin dysbiosis who received treatment involving the use of therapeutic textiles. Although there are promising outcomes regarding clinical parameters, safety and adverse effects, there is still a lack of information about the impact of therapeutic textiles on the skin microbiota of such patients. Intensive investigation and corroboration with clinical trials are needed to strengthen, define and drive the real benefit and the ideal biomedical application of therapeutic textiles.

Heat strain in professional firefighters: physiological responses to a simulated smoke dive in extremely hot environments and the subsequent recovery phase.

Firefighters risk heat strain during occupational tasks when exposed to extremely hot environmental conditions and performing high-intensity work. Relevant training scenarios are therefore essential. This study investigated the effect of a single simulated smoke dive and the following recovery phase on physiological and perceptual responses. Nineteen professional male firefighters (43 ± 8 yr) performed a 2-min stair walk and a15-min simulated smoke dive in a two-floor heat chamber (110 °C to 272°C) (HEAT), followed by a 5-min stair walk outside the heat chamber. Heart rate (HR), gastrointestinal temperature (Tgi) and skin temperatures were registered continuously during the test. The Tgi increased significantly from the start (37.5 ± 0.3°C) to the end of HEAT (38.4 ± 0.4°C) and further increased after the heat exposure (39.6 ± 0.5°C).The HR also increased significantly from the start (92 ± 14 bpm) to the end of HEAT (185 ± 13 bpm) and increased after the heat exposure to a maximum of 190 ± 13 bpm. The simulated smoke dive induced high physiological strain on the firefighters, and the increase in Tgi and HR after the hot exposure must be considered during live fire events when repeated smoke dives are required.

Carding Behavior and Bearing Capacity of a Newly Developed Cylinder Card-Clothing Compatible with Cotton and Terylene Fibers by Nb Alloying of AISI 1090 Steel.

Changing the metallic card clothing on a carding machine is costly when the spinning mills want to card different fibers from cotton to terylene or vice versa. This article proposes a newly developed cylinder card clothing compatible with cotton and terylene fibers by Nb alloying of AISI 1090 steel so that the spinning mills can change the type of fiber without changing the card clothing. Based on an idea developed from classical carding balance theory to study the adaptability of the cylinder card clothing for cotton and terylene fibers, the wall shear stress was used as the basis for compatibility analysis of carding behavior and bearing capacity with cotton and terylene fibers and as the focus of this study. Nb alloying of AISI 1090 steel showed good wear resistance in carding areas after heat treatment with high hardness above 840 Hv0.2 and extremely fine grain grade of 13.5 class, which increased about 25% compared to conventional 80 WV. The testing results in the spinning mills, including one cotton and two terylene fibers, showed good performance with this newly developed card clothing. In conclusion, the card clothing made of Nb alloying of AISI 1090 steel can handle different fibers with acceptable carding performance.

Influence of surgical scrubs outside the operation theatre on post-operative infections - A systematic review.

Background and Aims: Healthcare workers (HCWs), which include surgeons, anaesthesiologists, nurses, technicians, and other non-medical staff working in the operation theatre (OT), change to surgical scrubs for providing designated services. This study was intended to investigate the association of moving in and out of OT to other hospital areas without changing scrubs and its impact on bacterial infection. Methods: After PROSPERO registration, we performed a systematic review to compare the occurrence of surgical site infections (SSIs) with or without the movement of HCWs outside OT. We searched PubMed, Scopus, and Cochrane Library using relevant keywords. RoB-2 and ROBINS-E tools were used to assess the risk of bias in randomised controlled trials (RCTs) and observational studies, respectively. Results: We identified six articles that fulfilled the inclusion criteria: three RCTs and three observational studies. A risk of bias assessment revealed an overall low bias in the RCTs and an overall high bias in the observational studies. The analysis revealed a comparable incidence of bacterial infection in terms of colony-forming units when scrubs when HCWs moved in and out of OT with the same scrubs. A meta-analysis was not performed due to heterogeneity in participants and the OT set-up, as well as fewer studies and sample size. Conclusion: The evidence is insufficient to suggest that wearing scrubs outside the OT could increase the incidence of SSI in surgical patients or transmit the organisms to patients, causing infection. The present review neither supports nor is against wearing surgical scrubs outside OT premises.

Assessment of Impact of the Surface Modification Techniques on Structural, Biophysical, and Electrically Conductive Properties of Different Fabrics.

This article presents studies on the evaluation of the impact of surface modification of cotton, viscose, and polyester fabrics using three techniques (flocking, layer by layer, and screen printing) with materials with electrically conductive properties on their structural, biophysical, and conductive properties. Each tested fabric is characterized by specific biophysical properties. which can be disturbed by various modification methods, therefore, the following tests were carried out in the article: optical microscopy, micro-computed tomography, guarded perspiration heating plate, air permeability, sorption and electrical conductivity tester. The use of screen printing increased the thermal resistance of the cotton woven fabric by 119%, the polyester woven fabric by 156%, and the viscose fabric by 261%. The smallest changes in thermal resistance compared to unmodified textiles were observed in layer by layer modified fabrics and are as follows: -15% (cotton woven fabric), +77% (PES woven fabric), and +80% (viscose woven fabric).

Implementation difficulties and solutions for a smart-clothes assisted home nursing care program for older adults with dementia or recovering from hip fracture.

BACKGROUND: Wearable devices have the advantage of always being with individuals, enabling easy detection of their movements. Smart clothing can provide feedback to family caregivers of older adults with disabilities who require in-home care. METHODS: This study describes the process of setting up a smart technology-assisted (STA) home-nursing care program, the difficulties encountered, and strategies applied to improve the program. The STA program utilized a smart-vest, designed specifically for older persons with dementia or recovering from hip-fracture surgery. The smart-vest facilitated nurses' and family caregivers' detection of a care receiver's movements via a remote-monitoring system. Movements included getting up at night, time spent in the bathroom, duration of daytime immobility, leaving the house, and daily activity. Twelve caregivers of older adults and their care receiver participated; care receivers included persons recovering from hip fracture (n = 5) and persons living with dementia (n = 7). Data about installation of the individual STA in-home systems, monitoring, and technical difficulties encountered were obtained from researchers' reports. Qualitative data about the caregivers' and care receivers' use of the system were obtained from homecare nurses' reports, which were explored with thematic analysis. RESULTS: Compiled reports from the research team identified three areas of difficulty with the system: incompatibility with the home environment, which caused extra hours of manpower and added to the cost of set-up and maintenance; interruptions in data transmissions, due to system malfunctions; and inaccuracies in data transmissions, due to sensors on the smart-vest. These difficulties contributed to frustration experienced by caregivers and care receivers. CONCLUSIONS: The difficulties encountered impeded implementation of the STA home nursing care. Each of these difficulties had their own unique problems and strategies to resolve them. Our findings can provide a reference for future implementation of similar smart-home systems, which could facilitate ease-of-use for family caregivers.

Clothing Textiles as Carriers of Biological Ice Nucleation Active Particles.

Microplastics have littered the globe, with synthetic fibers being the largest source of atmospheric microplastics. Many atmospheric particles can act as ice nucleators, thereby affecting the microphysical and radiative properties of clouds and, hence, the radiative balance of the Earth. The present study focused on the ice-nucleating ability of fibers from clothing textiles (CTs), which are commonly shed from the normal wear of apparel items. Results from immersion ice nucleation experiments showed that CTs were effective ice nucleators active from -6 to -12 °C, similar to common biological ice nucleators. However, subsequent lysozyme and hydrogen peroxide digestion stripped the ice nucleation properties of CTs, indicating that ice nucleation was biological in origin. Microscopy confirmed the presence of biofilms (i.e., microbial cells attached to a surface and enclosed in an extracellular polysaccharide matrix) on CTs. If present in sufficient quantities in the atmosphere, biological particles (biofilms) attached to fibrous materials could contribute significantly to atmospheric ice nucleation.

We don't have to be dowdy just because we are disabled: Summarising the problems encountered by people with limited mobility in finding and buying practical and stylish clothes.

This paper explores how people with limited mobility choose and buy clothes, and how this could be improved, both for them and for retailers. It reports on an online survey carried out May-September 2023, asking people with limited mobility about their experiences, shows the practical difficulties they encounter and makes recommendations for retailers to improve their offer and reach to this group of consumers.

Investigating the influencing factors and prediction models of skin burns for firefighters' occupational safety.

Relevant studies in the fields of fire safety, occupational health and firefighter clothing were analyzed in this study to address the high injury rate among firefighters during fire rescue and the complexity of factors affecting skin burns. The findings indicate that the degree of skin burns in firefighters is primarily influenced by the heat source (heat flux, type), firefighter clothing (fabric, pattern) and the under-clothing air gap (thickness, characteristics). Since skin burns cannot be directly measured, internal skin heat transfer and burn prediction models are commonly employed to assess the impact of external factors on skin burns. These models can predict the safe working distance or time for firefighters. Investigating the influencing factors and prediction models of skin burns among firefighters holds significant value in enhancing operating procedures, optimizing firefighter clothing design and effectively preventing skin burns.

Biodegradable and flame-retardant cellulose-based wearable triboelectric nanogenerator for mechanical energy harvesting in firefighting clothing.

Integrating flexible triboelectric nanogenerators (TENGs) into firefighting clothing offers exciting opportunities for wearable portable electronics in personal protective technology. However, it is still a grand challenge to produce eco-friendly TENGs from biodegradable and low-cost natural polymers for mechanical-energy harvesting and self-powered sensing. Herein, conductive polypyrrole (PPy) and natural chitosan (CS)/phytic acid (PA) tribonegative materials were employed onto the Lycra fabric (LC) in turn to assemble the biodegradable and flame-retardant single-electrode mode LC/PPy/CS/PA TENG (abbreviated as LPCP-TENG). The resultant LPCP-TENG exhibits truly wearable breathability (1378.6 mm/s), elasticity (breaking elongation 291 %), and shape adaptivity performance that can produce an open circuit voltage of 0.3 V with 2 N contact pressure at a working frequency of 5 Hz with a limiting oxygen index of 35.2 %. Furthermore, facile monitoring for human motion of firefighters on fireground is verified by LPCP-TENG when used as self-powered flexible tactile sensor. In addition, degradation experiments have shown that waste LPCP-TENG can be fully degraded in soil within 120 days. This work broadens the applicational range of wearable TENG to reduce the environmental effects of abandoned TENG, exhibiting prosperous applications prospects in the field of wearable power source and self-powered motion detection sensor for personal protection application on fireground.

Are school uniforms associated with gender inequalities in physical activity? A pooled analysis of population-level data from 135 countries/regions.

BACKGROUND: We assessed whether school uniforms are associated with population-level gender inequalities in physical activity, and whether associations differ by school level, country/region income, and assessment method. METHODS: An ecological study design was employed. We collected data about global uniform practices using an online survey. We searched for country/region-level estimates of school-aged youth meeting physical activity guidelines from international surveillance studies. Study selection was conducted in duplicate using a systematic process, and a random sample of all data was checked to ensure extraction and pooling processes were accurate. We calculated absolute and relative gender inequalities in physical activity for each country. Linear regression examined associations between country/region-level uniform practices (binary yes/no exposure variable) and country/region-level gender inequalities in physical activity guideline compliance (absolute and relative inequalities). We investigated moderation by school level, stratified analyses by income group, and repeated primary analyses using device-measured data. RESULTS: Pooling data from 135 countries/regions (n = 1,089,852), we found no association between population-level uniform practices and gender inequalities in physical activity across all ages (absolute: ß = -0.2; 95% confidence interval (95%CI): -1.7 to 1.3, p = 0.74; relative: ß = 0.1; 95%CI: -0.1 to 0.2, p = 0.51). Subgroup analysis suggested a positive association in primary school settings (absolute: ß = 4.3; 95%CI: -0.0 to 8.6, p = 0.05). Among high-income countries, absolute inequalities were significantly greater in countries/regions with uniform practices (N = 37) compared to those without (N = 48) (9.1 (SD = 3.6) vs. 7.8 percentage points (SD = 4.3)). Repeating analyses using device-measured data (n = 32,130; N = 24) did not alter our primary finding. From initial descriptive statistics, we found that in countries/regions where a majority of schools (>50%) reportedly use uniforms, there was lower compliance with physical activity guidelines among all genders (median: 16.0%, interquartile range: 13.2-19.9, N = 103) compared to generally non-uniform countries/regions (median: 19.5%, interquartile range: 16.4-23.5, N = 32) (z = 3.04, p = 0.002). (N = countries, regions and studies represented; n = sample size or participants included). CONCLUSION: School uniforms are associated with greater gender inequalities in physical activity in primary school settings and in high-income countries. Our population-level findings warrant testing using individual-level data across contexts.

Effective role of tannic acid in the fabrication of hydrophobic, oleophilic, antibacterial, boron nitride/chlorobutyl rubber nanocomposite for reusable protective clothing and oil-water separation.

Boron Nitride (h-BN) possesses unique qualities like increased thermal conductivity, non-toxic nature, and environmental friendliness; hence, it is a good reinforcing agent for chlorobutyl rubber (CIIR). Tannic acid (TA) holds excellent bio-functional properties and is considered as an exceptional bio-exfoliating agent. Hence, in this study, we have utilized the bio-exfoliating ability of TA to exfoliate h-BN and evaluate its efficiency in reinforcing the CIIR matrix. Results demonstrate the exceptional role of tannic acid in imparting multifunctionality to chlorobutyl rubber. CIIR matrix introduced with h-BN:TA (h-BN:TA/CIIR) display excellent mechanical performance due to the reinforcing effect shown by excess TA in addition to the exfoliating effect. In addition, h-BN:TA/CIIR composite exhibited superior antimicrobial activity against S. aureus. The retention of thermal decontamination efficiency of the composites with increase in the number of cycles ensures their promising application in the field of reusable gloves and chemical protective clothing. The exfoliated filler created a tortuous path inside the matrix which prevents the permeation of solvent. Hence the work intends to synergize the hydrophobic nature of h-BN, exfoliating capacity of TA and the barrier abilities of CIIR for the adsorption of oil from oil-water mixture and portrays the future of the trio in water purification.

Advances of polyolefins from fiber to nanofiber: fabrication and recent applications.

Polyolefins are a widely accepted commodity polymer made from olefinic monomer consisting of carbon and hydrogen. This thermoplastic polymeric material is formed through reactive double bonds of olefins by the addition polymerization technique and it possesses a diverse range of unique features for a large variety of applications. Among the various types, polyethylene and polypropylene are the prominent classes of polyolefins that can be crafted and manipulated into diversified products for numerous applications. Research on polyolefins has boomed tremendously in recent times owing to the abundance of raw materials, low cost, lightweight, high chemical resistance, diverse functionalities, and outstanding physical characteristics. Polyolefins have also evidenced their potentiality as a fiber in micro to nanoscale and emerged as a fascinating material for widespread high-performance use. This review aims to provide an elucidation of the breakthroughs in polyolefins, namely as fibers, filaments, and yarns, and their applications in many domains such as medicine, body armor, and load-bearing industries. Moreover, the development of electrospun polyolefin nanofibers employing cutting-edge techniques and their prospective utilization in filtration, biomedical engineering, protective textiles, and lithium-ion batteries has been illustrated meticulously. Besides, this review delineates the challenges associated with the formation of polyolefin nanofiber using different techniques and critically analyzes overcoming the difficulties in forming functional nanofibers for the innovative field of applications.

Use of Electrospinning for Sustainable Production of Nanofibers: A Comparative Assessment of Smart Textiles-Related Applications.

Textile production is a major component of the global industry, with sales of over USD 450 billion and estimations of an 84% increase in their demand in the next 20 years. In recent decades, protective and smart textiles have played important roles in the social economy and attracted widespread popularity thanks to their wide spectrum of applications with properties, such as antimicrobial, water-repellent, UV, chemical, and thermal protection. Towards the sustainable manufacturing of smart textiles, biodegradable, recycled, and bio-based plastics are used as alternative raw materials for fabric and yarn production using a wide variety of techniques. While conventional techniques present several drawbacks, nanofibers produced through electrospinning have superior structural properties. Electrospinning is an innovative method for fiber production based on the use of electrostatic force to create charged threads of polymer solutions. Electrospinning shows great potential since it provides control of the size, porosity, and mechanical resistance of the fibers. This review summarizes the advances in the rapidly evolving field of the production of nanofibers for application in smart and protective textiles using electrospinning and environmentally friendly polymers as raw materials, and provides research directions for optimized smart fibers in the future.

Evaluation of disposable protective garments against epoxy resin permeation and penetration from anti-corrosion coatings.

INTRODUCTION: Epoxy-based resin formulations are a frequent cause of allergic and irritant contact dermatitis in the construction and painting industries. Cases of epoxy resin contact dermatitis continue to persist across many sectors and are likely attributable to the growing use of epoxy products, including epoxy-based anti-corrosion coatings and inadequate skin protection. There are no published performance data against epoxy resins for garment materials and gloves to guide proper material selection in the workplace. OBJECTIVES: The objective of this study was to evaluate the resistance of 5 protective garment materials against permeation and penetration by bisphenol A diglycidyl ether and its higher oligomers found commonly in epoxy-based anti-corrosion coatings. METHODS: Five disposable garment materials were evaluated for resistance to bisphenol A diglycidyl ether monomers and oligomers during contact with epoxy-based anti-corrosion coatings, including latex gloves, nitrile gloves, Tyvek coveralls, polypropylene/polyethylene (PP/PE) coveralls, and a cotton T-shirt. A permeation test cell system was used to evaluate each garment material against an epoxy-based zinc-rich primer and an epoxy-based intermediate coating using a realistic application method. Glass fiber filters were used to collect permeating and penetrating epoxy resin during a 120-min test period. Bisphenol A diglycidyl ether quantification was performed with high-performance liquid chromatography-electrospray ionization-tandem mass spectrometry. Paint loading, coating thickness, and homogeneity were assessed on polytetrafluoroethylene filters sprayed in series in permeation test cells. RESULTS: Latex gloves provided the least resistance to permeation by BADGE in coating formulations, with a maximum cumulative permeation over the 2-h test interval of 21.7 ng cm-2 with the primer and 513.8 ng cm-2 with the intermediate coating product. Nitrile gloves were not permeated by either coating formulation. The Tyvek coveralls provided greater protection as compared to the PP/PE coveralls. The cotton T-shirt was penetrated by bisphenol A diglycidyl ether more frequently than any of the tested garment materials and resulted in a maximum cumulative penetration of 128 ng cm-2 with the primer and 28.0 ng cm-2 with the intermediate coating. CONCLUSION: Although all the garment materials evaluated during this study provided sufficient protection to prevent cumulative permeation in excess of the established acceptable permeation thresholds, the use of nitrile gloves and Tyvek coverall is highly recommended to minimize skin exposure to bisphenol A diglycidyl ether. We recommend cotton T-shirts to be used under Tyvek coveralls as a secondary layer of skin protection and for added comfort, but not as a primary protection layer.

Effect of wet clothing removal on skin temperature in subjects exposed to cold and wrapped in a vapor barrier: a human, randomized, crossover field study.

BACKGROUND: Prehospital care for cold-stressed and hypothermic patients focuses on effective insulation and rewarming. When encountering patients wearing wet clothing, rescuers can either remove the wet clothing before isolating the patient or isolate the patient using a vapor barrier. Wet clothing removal increases skin exposure but avoids the need to heat the wet clothing during rewarming. Leaving wet clothing on will avoid skin exposure but is likely to increase heat loss during rewarming. This study aimed to evaluate the effect of wet clothing removal compared to containing the moisture using a vapor barrier on skin temperature in a prehospital setting. METHODS: This randomized crossover experimental field study was conducted in a snow cave in Hemsedal, Norway. After an initial cooling phase of 30 min while wearing wet clothes, the participants were subjected to one of two rewarming scenarios: (1) wet clothing removal and wrapping in a vapor barrier, insulating blankets, and windproof outer shell (dry group) or (2) wrapping in a vapor barrier, insulating blankets, and windproof outer shell (wet group). The mean skin temperature was the primary outcome whereas subjective scores for both thermal comfort and degree of shivering were secondary outcomes. Primary outcome data were analyzed using the analysis of covariance (ANCOVA). RESULTS: After an initial decrease in temperature during the exposure phase, the dry group had a higher mean skin temperature compared to the wet group after only 2 min. The skin-rewarming rate was highest in the initial rewarming stages for both groups, but increased in the dry group as compared to the wet group in the first 10 min. Return to baseline temperature occurred significantly faster in the dry group (mean 12.5 min [dry] vs. 28.1 min [wet]). No intergroup differences in the subjective thermal comfort or shivering were observed. CONCLUSION: Removal of wet clothing in combination with a vapor barrier increases skin rewarming rate compared to encasing the wet clothing in a vapor barrier, in mild cold and environments without wind. TRIAL REGISTRATION: ClinicalTrials.gov ID NCT05996757, retrospectively registered 18/08/2023.

Innovative building materials by upcycling clothing waste into thermal energy storage matrix with phase change materials.

The current volume of clothing waste reached 115 million tons in 2021 and is projected to increase to approximately 150 million tons by 2030. This significant surge in clothing waste has prompted heightened discussions regarding environmentally friendly recycling methods. Clothing presents complex properties, posing substantial challenges to recycling and usually resulting in environmental pollution when disposed. In this study, our recycling approach capitalizes on the differing melting points of textiles. This transformation was achieved through a physical process that included an opening procedure and high temperature heat compression. Textile materials exhibit exceptional thermal properties. Through experimentation on 50 g fiber specimens, thermal conductivities similar to commercial insulation materials were observed, registering an average of 0.0592 W/m·K at 20 °C and 0.06053 W/m·K at 40 °C. This study explores the impregnation of phase change materials (PCMs) into clothing waste-based specimens, equipping them with heat storage capabilities. During the experimental phase, we employed three distinct types of PCMs to evaluate their thermal properties and heat storage capacities in relation to their respective melting temperatures. Through thermal properties analysis, we determined the latent heat capacity of each specimen, ranging from a minimum of 6.63 J/g to a maximum of 75.81 J/g. Our observations indicated a reduction in peak temperature and time-leg effects attributable to the use of PCMs for surface heat flow. This research underscores the superior thermal performance of construction and building materials derived from clothing waste, enhanced by the integration of PCMs, when compared to traditional materials and other waste-derived alternatives.